 |
2.0 litre alloy
oxygen cylinder with pin-index valve. Ideal for use with most
microVENT resuscitation
kits.
This is a 2 litre capacity oxygen cylinder that can be charged to
200 bar pressure, holding 400 litres of compressed oxygen. Supplied
with a pin-index valve (oxygen specific) with integral knurled valve
on/off which does not require a separate operating key. The cylinder
can be supplied either empty or charged with oxygen.
| Specifications: |
Full |
Empty |
| Weight
(kg) |
3.53 |
2.98 |
| Length
including valve (mm) |
480 |
480 |
| Diameter
(mm) |
100 |
100 |
| Part
number |
676-0126-00 |
676-0125-00 |
| Specifications
shown above are approximate and may be subject to change without
notice. |
|
|
When supplied
empty the valve is not torqued into place so as to facilitate easy
inspection by the filling organisation.
|
|
|
 |
2.0 litre steel
oxygen cylinder with pin-index valve. Ideal for use with most
microVENT resuscitation
kits.
This is a 2 litre capacity oxygen cylinder that can be charged to
200 bar pressure, holding 400 litres of compressed oxygen. Supplied
with a pin-index valve (oxygen specific) with integral valve on/off
which does not require a separate operating key. However the provision
for operating with a key also exists. The cylinder can be supplied
either empty or charged with oxygen.
| Specifications: |
Full |
Empty |
| Weight
(kg) |
3.53 |
2.98 |
| Length
including valve (mm) |
450 |
450 |
| Diameter
(mm) |
100 |
100 |
| Part
number |
676-0141-00 |
676-0140-00 |
| Specifications
shown above are approximate and may be subject to change without
notice. |
|
|
Specification
of cylinder: TPED, EN1964-1
When supplied
empty the valve is not torqued into place so as to facilitate easy
inspection by the filling organisation.
|
|
|
 |
2.9 litre alloy
oxygen cylinder with pin-index valve. Ideal for use with most
microVENT resuscitation
kits.
This is a 2.9 litre capacity oxygen cylinder that can be charged
to 139 bar pressure, holding over 400 litres of compressed oxygen.
Supplied with a pin-index valve (oxygen specific) with integral
toggle on/off which does not require a separate operating key. The
cylinder is normally supplied empty of oxygen.
The cylinder
is MD DOT 3AL and is suitable for use only in countries where the
USA specification cylinders are accepted for use. It is not for
sale for use in Europe.
| Specifications: |
Full |
Empty |
| Weight
(kg) |
3.34 |
2.70 |
| Length
including valve (mm) |
512 |
512 |
| Diameter
(mm) |
111.3 |
111.3 |
| Part
number |
676-0354-00 |
676-0353-00 |
| Specifications
shown above are approximate and may be subject to change without
notice. |
|
|
Manufactured
in accordance with U.S. Department of Transportation (DOT) 3AL and
Transport Canada (TC) 3ALM requirements. Every cylinder is inspected
and tested by a DOT and TC authorized independent inspection agency.
|
|
|
 |
1.0 litre steel
oxygen cylinder with pin-index valve. For use with the microVENT
200L resuscitation kits (see
our brochure download page) and other kits requiring
a small, lightweight and strong cylinder.
This is a 1litre capacity oxygen cylinder that can be charged to
200 bar pressure, holding 200 litres of compressed oxygen. Supplied
with a pin-index valve (oxygen specific) with integral valve on/off
which does not require a separate operating key. The cylinder can
be supplied either empty or charged with oxygen.
| Specifications: |
Full |
Empty |
| Weight
(kg) |
1.91 |
1.64 |
| Length
including valve (mm) |
360 |
360 |
| Diameter
(mm) |
83 |
83 |
| Part
number |
676-0134-00 |
676-0135-00 |
| Specifications
shown above are approximate and may be subject to change without
notice. |
|
|
Specification
of cylinder: TPED, EN1964-1
Please
note: When the cylinder is supplied empty the valve is not torqued
into place so as to facilitate easy inspection by the filling organisation.
|
|
|
 |
2.0 litre alloy
oxygen cylinder with threaded valve outlet for use with the older
meditech marine range resuscitators with the threaded
regulator input (meditech marine products have also been available
with the pin-index connections from 2004).
This is a 2 litre capacity oxygen cylinder that can be charged to
200 bar pressure, holding 400 litres of compressed oxygen. Supplied
with a threaded output valve (oxygen specific) with integral handwheel
on/off which does not require a separate operating key and can be
easily operated by gloved hands. The cylinder can be supplied either
empty or charged with oxygen.
| Specifications: |
Full |
Empty |
| Weight
(kg) |
3.58 |
3.04 |
| Length
including valve (mm) |
475 |
475 |
| Diameter
(mm) |
100 |
100 |
| Part
number |
676-0128-00 |
676-0127-00 |
| Specifications
shown above are approximate and may be subject to change without
notice. |
|
|
When
supplied empty the valve is not torqued into place so as to facilitate
easy inspection by the filling organisation.
|
|
Cylinders are
available with a range of different valves according to the requirements
and standards of the intended country of destination. Contact Meditech
(B.N.O.S. Meditech Ltd.) with your specification.
Specifications
shown above are approximate and may be subject to change without
notice.
|